Best abrasive finishing products Reviews

Wizards Finish Cut Compound - Levels Scratches and Brightens Dull Finishes With Smooth Show Finish - Non-Greasy and Water Based With Easy Clean-Up - Marine Compound and Finishing Material - 32 oz

  • ... Cutting Compound: No swirls with easy cleanup with Wizards Finish Cut Compound. Our unique formulation levels and removes scratches on paint and clear coat, fresh or aged finishes. It is your one step car buffing compound for cars on most colors and clear coats, fresh or aged finishes..
  • Satisfaction Policy: Wizards Products will stand by the quality and performance stated of all items sold on this website, presuming products are used as directed for their intended purpose. If you are dissatisfied with your Wizards Products purchase for any reason please contact a customer service team member immediately..
Check Stock

Micro Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block

  • ...asive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop..
  • Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood..
  • MicroMesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer’s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has ful....
Check Stock

3M 07530 Roloc Bristle Disc, Green

  • Molded, abrasive filled bristles finish, polish, and deburr more effectively than wire brushes.
  • Proprietary 3M Ceramic Abrasive Grain blend provides high degree of finish quality throughout the life of the disc.
  • Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing.
  • Flexible bristles produce uniform finishes around protrusions, detail grooves, patterns, and other hard-to-reach areas.
  • Contains no wire filaments for improved safety.
Check Stock

Glarks 3 Pack 2 Inch Bristle Disc Grit 50# 80# 120# Abrasive Bristle Disc with 1/4 Inch Shank for Remove Coatings on Metal

  • Scotch-Brite Bristle Discs & Brushes last longer than most abrasives and provide the same finish and cut throughout their life..
  • An operator quickly and easily achieves a quality, consistent finish with light pressure..
  • For productivity in automated procedures, there are fewer changeovers..
  • These fast running discs efficiently clean or strip many substances from metal surfaces without damaging the work piece..
Check Stock

3M Scotch-Brite Scuff Pads (3M 07445/07447/07448 (5 Pads of Each))

  • ...sional non-woven abrasive pads made with cut fiber strands, coated with resin, and durable aluminum oxide abrasive. These non-woven pads are reusable and can be used dry or wet, and they resist tearing, loading, and clogging. They deliver a consistent scratch pattern and uniform finish, providing you with increased productivity..
  • Typical applications are fine finishing, surface adhesion preparation, auto paint & primers surface and final prep, reconditioning, removing oxidation, cleaning, cleansing, and blending. You can use pads on paint, metal, wood, plastics, ceramics, glass, and fiberglass..
  • Our scuff pads are suitable for use in auto body and paint shops, woodworking wood furniture making, metalworking metal sanding, crafting, household, drywall, industrial, fiberglass, plastics, or any other surface that needs scuffing or sanding..
  • Dura-Gold offers a complete vast product line of professional, high-quality sandpaper types that provide exceptional sanding performance, so you can get the job done fast, saving you time and money!.
Check Stock

Henn&Hart Coffee Table, 1, Black & Industrial Metal Perforated Mesh Shelf Console Table, 1, Black

  • Product 1: Hand crafted bronze finish is applied to the steel frame..
  • no harsh chemicals or abrasive cleaning materials..
  • Product 2: Handcrafted blackened bronze finish is applied to the steel frame..
  • Product 2: Features a durable tempered glass top and a metal mesh shelf..
  • Product 2: Table has a weight capacity of 50 lbs.
Check Stock

Howard Products FW0016 Wood Polish & Conditioner, 16 oz, orange, 16 Fl Oz and , Golden Oak Restor-A-Finish, 8 oz

  • Product 1: Polishes all wood surfaces to a soft luster with a protective coating of Carnauba Wax and Beeswax.
  • Product 1: Introduces conditioning oils that “feed” the wood and helps keep it from drying and fading.
  • Product 1: Enhances the natural beauty and depth of grain in finished and unfinished wood.
  • Product 1: For use on antiques, dining tables, kitchen cabinets, wood doors and trim, etc..
  • Product 2: Restor-A-Finish is a unique finish-penetrating formula that restores wood finishes while blending out minor scratches, blemishes and abrasions.
  • Product 2: Available in nine colors to match almost any wood finish tone.
  • Neutral, Maple-Pine, Golden Oak, Cherry, Walnut, Mahogany, Dark Walnut, Dark Oak, and Ebony Brown.
  • Product 2: With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a complete refinishing job can be restored in a few minutes.
  • Product 2: Removes white heat rings and water marks, sun fade, oxidation, smoke damage and most other blemishes.
Check Stock

Sandpaper, 90 Pcs 400 to 3000 Grit Wet Dry Sandpaper Assortment 9x3.6 Inch for Automotive Sanding - Wood Furniture Finishing - Wood Turing Finishing and More by VERONES

  • Multiple Grit Sandpaper Set: VERONSE Sandpaper Package comes with total 90 pieces assorted abrasive sheet in grit 400/ 600/ 800/ 1000/ 1200/ 1500/ 2000/ 2500/ 3000.Each grit comes 10 sheets. You will have a variety of options..
  • Electro coated ,Good toughness, good polishing effect, High efficiency, long service life Choose high quality natural abrasive..
  • Wet and Dry Using: VERONES Sandpaper Set use advanced production technology which can suitable for both wet and dry use will not fall apart, tear or crumble off during using. Widely applied in automotive sanding, wood furniture finishing, wood turning finishing, metal finishing and more..
  • Any Size as You Need: VERONES Sandpaer size 8.85*3.54 inch which are big enough to cut is to any size as you need it..
  • Money Save Set: Doing this job can not only save money but learn a valuable skill. This sand paper kit is perfect for handling all manner of odd jobs and little fixes from removing scuffs and abrasions on walls and baseboards to smoothing out wood or mold spurs on toys or furniture, refinishing handrails, or lawn furniture and even wet sanding blemishes from your vehicle..
Check Stock

Howard Products ORS016 Orange Oil Wood Polish, 16 oz & Howard RF5016 RF3016 Restor-A-Finish, 16 oz, Mahogany

  • Product 1: Polishes all wood furniture to a nice shine with a pleasant fresh scent of oranges.
  • Product 1: Conditions finished and unfinished wood surfaces to a beautiful, natural glow using real orange oil.
  • Product 1: Polishes and helps prevent drying and fading of all your wood furniture including kitchen cabinets, tables, chairs, desks, paneling, and antiques.
  • Product 1: Easily removes surface dirt and dust without drying out or harming the wood.
  • Product 2: Restor-A-Finish is a unique finish-penetrating formula that restores wood finishes while blending out minor scratches, blemishes and abrasions.
  • Product 2: Available in nine colors to match almost any wood finish tone.
  • Neutral, Maple-Pine, Golden Oak, Cherry, Walnut, Mahogany, Dark Walnut, Dark Oak, and Ebony Brown.
  • Product 2: With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a complete refinishing job can be restored in a few minutes.
  • Product 2: Removes white heat rings and water marks, sun fade, oxidation, smoke damage and most other blemishes.
Check Stock

Howard Products FW0016 Wood Polish & Conditioner, 16 oz, Orange, 16 Fl Oz & RF9016 RF3016 Restor-A-Finish, 16 oz, Cherry

  • Product 1: Polishes all wood surfaces to a soft luster with a protective coating of Carnauba Wax and Beeswax.
  • Product 1: Introduces conditioning oils that “feed” the wood and helps keep it from drying and fading.
  • Product 1: Enhances the natural beauty and depth of grain in finished and unfinished wood.
  • Product 1: For use on antiques, dining tables, kitchen cabinets, wood doors and trim, etc..
  • Product 2: Restor-A-Finish is a unique finish-penetrating formula that restores wood finishes while blending out minor scratches, blemishes and abrasions.
  • Product 2: Available in nine colors to match almost any wood finish tone.
  • Neutral, Maple-Pine, Golden Oak, Cherry, Walnut, Mahogany, Dark Walnut, Dark Oak, and Ebony Brown.
  • Product 2: With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a complete refinishing job can be restored in a few minutes.
  • Product 2: Removes white heat rings and water marks, sun fade, oxidation, smoke damage and most other blemishes.
Check Stock

Walter 06A452 Enduro-Flex Turbo Abrasive Flap Disc [Pack of 10] - 36/60 Grit, 5 in. Grinding Disc with Threaded Arbor Hole. Abrasive Grinding Supplies

  • Flap Disc: abrasive grinding disc can be used to efficiently remove material and consumes less time in the finishing process.
  • Applications: surface conditioning disc helps in blending welds, breaking edges and abrasive grinding. This flat disc is also ideal for deburring.
  • Metal Grinding Disc: grinder disc uses exclusive Cyclone Technology for better performance, offering maximum grinding ability and solid edge stability. Abrasive disc works perfectly on steel and stainless steel.
  • Grinding Disc: featuring patented Turbofan Cooling design at the backing, this grinding disc allows air to cool the temperature of work pieces and reduces the heat transfer to the surface, thus increasing the lifespan of product.
  • Specifications: surface finishing disc measures 5 in. in diameter and is rated for grinding tool with maximum rotational speed of 12200 RPM. The diameter of the arbor hole is 5/8-11 in..
Check Stock

Abrasive Belt, 10Pcs Aluminum Oxide Circular Sanding Belt Assortment Kit, GXK51-B 1220x50mm Abrasive Band, for Woodworking, Furniture, Hardware Leather Grinding and Polishing(120#)

  • Utility: linear finishing drum is manufactured to work efficiently with Line-Mate III tool. It is quite suitable for polishing, blending, burnishing, and brightening the metal surfaces.
  • Industrial Finishing Drum: durable abrasive grit drum is safe to use for industrial purposes. Line finishing drum produces shadow-free finishes on stainless steel, aluminum, brass, copper, and other alloys.
  • Consistent Finishing: designed to be easily mounted on Line-Mate III finishing tool, this grit course drum delivers consistent line finishes with minimal efforts.
  • Efficiency: abrasive finishing drum is manufactured to minimize the finishing costs by producing quick and hassle-free linear finishing.
  • Specifications: abrasive grit surface conditioning drum measures 4 ½ in. in diameter and 4 in. in width. It can be used with finishing tool with maximum rotational speed of 3800 RPM.
Check Stock